News

Home  >  News  >  Industry News

Matters needing attention in the embedding of high pole lamp foundation

source:Industry News Popular:Silicone Neon release time:2021-06-01 Article author:sznbone

  The high pole lamp is beautiful and beautiful, and has good practical effect. It is currently widely used in road lighting. The safety performance of the high pole lamp mainly depends on its foundation embedded, which is very important. Then, the following matters must be paid attention to when the high pole lamp foundation is embedded.

Matters needing attention in the embedding of high pole lamp foundation(图1)

  1. There is a direct relationship between the foundation of the high-pole lamp and the soil condition of the installation location, as well as the height and weight of the high-pole lamp. These aspects must be considered when designing and making the high-pole lamp.

  2. All fasteners except bolts must be made of stainless steel, which is used for a long time and is easy to manipulate. In addition, when tightening various nuts, washers or spring washers must be added. The distance between the tightened screw and the nut shall not be less than two pitches.

  3. In the base of the high-pole lamp, the threading pipes for the revenue and expenditure cables should be reserved. These threading pipes are generally made of hot-dip galvanized steel pipes. At the same time, the reinforcement and strength of the base must be marked, so as to facilitate the construction of high-pole lights Provides a foundation and convenience.

  4. It is necessary to install a lightning rod at the top of the high pole lamp, and the lightning rod must be set independently, the needle length is generally half a meter, it must be noted that the tip of the lightning rod cannot be sprayed, and the grounding body must be set around the base of the lamp. There are specific requirements for the acceptance length of the grounding electrode, so when making and installing, it must be constructed in accordance with the relevant requirements. The grounding body must have light poles, light boards, and distribution boxes for reliable connections, and ultimately form a reliable conductive path.

  In short, the embedded quality of the high-pole lights has a decisive effect on the safety performance of the high-pole lights. Care must be taken during the installation and construction process.


Read recommendations:

ADS-IC359S-Auto(with-pins) funfair light flat automatic

ADS-E14-AC4016 e14 16pcs 2835 led pure color light

ADS-IC6018G led pixel amusement rgb lights

Aidisen programmable 12mm led lighting for Christmas decoration

Operating environmental protection and energy-saving machinery and equipment selected by led line li

Previous:5 great spots for LED strip lights around your home, get the vibe you want Back to list Next:What are the advantages of wind and solar hybrid LED street lights?

Column related

Article recommendation

Key Products

Related products