Home  >  Products  >  Controller
>
<

T-1000S 5-24V SD Card LED Pixel Controller

Model:T-1000S


Memory Card:

Type:SD Card

Capacity:128MB-32GB

Format:FATor FAT 32

Storage file:*.led


Physical parameter:

Working temperature :-30℃—85℃

Working power:DC 5V -24V input

Power consumption:2W

Data transmission interface:3pin binding post

Weight: 0.35Kg

Size:L159MM*W89MM*H24MM


Send Inquiry Leave Message

Product Detail

Features

1、32—256 Gray level,Support software Gamma correction。

2、Support the rules and special-shaped handle.

3、Single-port output,can support 2048 pixels。

4、Off-line(SD Card) control, play back content stored in the SD card.

5、T-1000S store a maximum of 16 programs,copy multiple files to the SD card in order,

after formatting the SD card as “FAT” format.

6、The program must be named in orders . just as :00_1.led, 01_1.led, 02_1.led.

7、Compatible with single line or double line chips.


Support Chip

00: UCS1903,1909,1912,2903,2904,2909,2912;TM1803,1804,1809,1812;

SM16703,16709,16712;WS2811,WS2812,WS2813,WS2815,WS2818;

INK1003LX3203,1603,1103;GS8205,8206;SK6812(max. Supports lights 1500 pixels)   

01:SM16716,16726(support up to 1500 pixels)   

02:P9813(support up to 1500 pixels)   

03:LPD6803(support up to 1500 pixels)    

04:LX1003,1203(support up to 1500 pixels)   

05:WS2801(support up to 1500 pixels)                 

06:LPD1886(support up to 1500 pixels)   

07:TM1913(support up to 1500 pixels)                  

08:TM1914(support up to 1500 pixels)   

09:P9883,P9823(support up to 1500 pixels)          

10:DMX(support up to 512 pixels, suggest to support ≤320 pixels)

11:DMX 500K(support up to 512 pixels, suggest to support ≤320 pixels)

12:DMX 250K-CZF (support up to 512 pixels, suggest to support ≤320 pixels)

13:DMX 250K-CZF (support up to 512 pixels, suggest to support ≤320 pixels)

Appearance picture:


1-21040Q42250E9.png


Mode of connection

1-21040Q42412322.png

1. Multiple T-1000S controllers can be cascaded together and work synchronously.

2. T-1000S one TTL(SPI) signal and one RS485 signal port output,can control 2048 pixels/lamps;

3. When the chip for LED is single line chip just with data, then just need to be connected with DAT and GND of the

controller. If the chip for LED is double line chip with DAT and CLK, then need to be connected with DAT, CLK, and

GND of the controller.

4. If you need to use RS485 signal you need to connect controller A interface with LED lamps A (DMX+), controller B

interface with LED lamps B(DMX-),

5. I f you need to control a new IC type by the controller, software code mode is:T-1000-IC model.




Previous:mini-controller DC5V-24V RGB mini remote controller Next:K-8000C SD Card Led Controller 8912Pixels DMX Led Pixel Controller Offline DC5-24V

Popular recommended products

Related products